Sales

>

Marine & Industrial Paints, JOTUN.

> Yacht Paints

>
Watermakers, Reverse Osmosis Desalination Systems, Parts and Consumables.

> ECH2OTec. Commercial Watermakers

>

ECH2OTec. Yacht Watermakers

>
Marine and Industrial Generators.

>

Stainless Steel & Aluminum raw stock.

>
Inflatable Dinghies.

>
Roller Reefing Systems, Profurl.
 
 
Services

>



Sandblasting, UHPW blasting and application ( airless ) of  paint.
>


Installation, repair and maintenance of all types of watermakers.

>



Sourcing of technical offshore and marine items.
>


General offshore and marine supplies.


Manufacture

> ECH2OTec. Watermakers
 


 








 

 




 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

























  JOTUN MARINE COATINGS

Protective Coatings - Marine Protection



JOTUN is a world leader in providing the most effective solutions to corrosion and fouling. The JOTUN Corporate Technology Centre and R&D laboratory in Sandefjord, Norway are complemented by R&D laboratories in Dubai, Japan and Malaysia. Innovative thinking is placed alongside a wealth of practical knowledge and experience, earned in the protection of more than 20,000 dockings worldwide.Through Echo-Marine, JOTUN marine coatings are made available for usage in drydockings in Trinidad as well as for exportation and sea stock. We are able to supply fast and reliable from our extensive stock and our brokerage department will take care of the necessary documentation and export papers.


AVAILABLE PRODUCTS:

PRIMERS      
NAME GENERIC TYPE USE DFT microns (mils)
Alkydprimer Alkyd, red and grey In an alkyd system, w. Pilot II, above waterline. 2-3 x 40 mic (2mils)
Vinyguard SG 88 Vinyl, one pack Above and below waterline, general use, tiecoat for AF. 2-3 x 80 mic (3mils)
Barrier (77) Zinc Rich Epoxy Primer w. galvanic protection, very fast drying. Followed by Epoxy, Vinyl or Acrylic system. 1 x 50 mic (2mils)
Jotamastic 87 (AL or GF) Epoxy Mastic, two pack All round primer / topcoat w. excellent properties. 1-2 x 150 - 200 mic (6-8mils)
Primastic Universal Epoxy Mastic, two pack All round, economical primer  w. excellent properties 1-2 x 150 - 200 mic (6-8mils)
Safeguard Universal Epoxy - Vinyl Below and above waterline, good base for selfpolishing AFs 1-3 x 150 mic (6mils)
according to system
Penguard HB Epoxy, two pack For Aluminum hulls, potable water tanks 2 x 100 mic (4mils)


All topcoats can be tinted to JOTUN standards and most RAL, British and US standards with our MCI tinting machine.

TOPCOATS
NAME GENERIC TYPE USE DFT microns (mils)
Pilot II Alkyd, one pack Interior / exterior, glossy, in conventional systems 1 x 50 mic (2mils)
Pioner TC Acrylic, one pack Interior / exterior, over conventional or epoxy systems. Quick drying. 1 x 50 mic (2mils)
Hardtop AS Polyurethane, two pack Exterior, glossy, over epoxy / mastic systems. 1 x 50 mic (2mils)
Conseal TU Acrylic Primer-top coat, direct to metal or on 'Barrier'. 1 x 120 mic (5 mils)
Jotaplast 07 Acrylic, water-based Interior topcoat, solvent-free, odorless. Light colors. 1 x 35-50 mic (2 mils)

 

ANTIFOULINGS      
NAME GENERIC TYPE USE DFT microns (mils)
Seaqueen Selfpolishing, tinfree All trades. High performance 100-200 mic (4-8mils)
Seaquantum Classic Hydrolizing, tinfree Top of the line long-term protection at medium speeds. 150 - 300 mic (6-12mils)
SeaAlu Selfpolishing, Copperfree For Aluminum hulls, copper free, up to 20 kn 100-200 mic (4-8mils)

 

OTHER COATINGS      
NAME GENERIC TYPE USE DFT microns (mils)
Conseal TU Acrylic Primer-top coat, direct to metal. 1 x 120 mic (5 mils)
Jotaguard 85 Coal tar epoxy Ballast tanks, cargo holds, crude oil tanks. 3 x 100 mic (4 mils)
Marathon Glass flake reinforced Epoxy Areas exposed to high mechanical wear, abrasion. 300 + 200 (12+8 mils)
Balloxy HB Light Modified Epoxy, two pack For use in ballast tanks, cofferdams. 2 x 200 mic (8mils)
Aluminium Paint HR Alkyd Heat resistant coating up to 250 C (500 F). Smoke-stacks, engine parts or general aluminum sheen topcoat. 2 x 25 mic (1 mil)
Solvalitt
Hot Temp Aluminum
Silicone resin Heat resistant coatings up to 600 C (1200 F). 2-3 x 25 mic (1 mil)


If you want to calculate how much paint you need for a certain area, or how many square meters or square feet you can paint with a given amount of paint you can access our paint calculator by pressing one of the following buttons:

paint calculator, metric

paint calculator, imperial








 
   
Home Contact Information Main